The product has been added to your shopping cart Show shopping cartCheckout
Your browser is not supported. For the best experience, a newer version or another browser is recommended.
In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

TG-10STX/1

173730
In stock
Product question

What would you like to know about TG-10STX/1?

Send

Description

Interpretation System
16-channel PLL wireless transmitter
An unobtrusive and elegant way to wirelessly transmit interpretations which have been generated, e.g. via the IT-12 system into an auditorium.
Two different input signals (CH1/CH2) can be inserted via the rear comb. jacks, individually adjusted in the level and then be transmitted as a mono mixed signal. A further input signal (CH3) can be fed to the TG-10STX via a 6.3 mm mono jack and be used for monitoring purposes via the 3.5 mm stereo jack at the front panel. The volume for the headphone output can continuously be adjusted. The channels 1 and 2 can also be monitored and controlled in this way. Two loop outputs are available to insert further units into the system, with minimum wiring effort.
The TG-10STX/1 operates in the commonly assigned frequency range 863-865 MHz and is thus licence-free.
A parallel operation of up to three wireless transmitters is possible. The TG-10R/1 can be used as a suitable receiver.
  • Power supply via supplied PSU
  • Dimensions: 214x45x240 mm
  • Weight: 1.3 kg
Licence-free in the EU!


General information-
Descriptiontour guide system wireless transmitter
Carrier frequency range863-865 MHz
Audio frequency range40-15,000 Hz
Channels16
THD-
Dynamic range-
RF S/N ratio-
Operating time-
Admiss. ambient temp.0-40 °C
Power supply-
Dimensions-
Total weight-
Connections-
Specifications transmitter-
Transmitting power-
Operating range60 m
Power supply transmittervia encl. power supply
Width transmitter214 mm
Height transmitter45 mm
Depth transmitter240 mm
Weight transmitter1.3 kg
Connections transmitter2 x comb. jack (input CH1/CH2),

1 x 6.3 mm mono jack (input CH3),

1 x 3.5 mm stereo jack (headphones),

2 x 6.3 mm mono jack (loop outputs)

Specifications receiver-
Audio signal receiver-
Power supply receiver-
Width receiver-
Height receiver-
Depth receiver-
Weight receiver-
Connections receiver-
MD-306
MD-306
221070
Choose
TG-10R/1
TG-10R/1
253070
Choose