Audio transformer 1:3/1:10 for microphone signals, from NEUTRIK.- Very compact design, e.g. also suitable for the installation into connector housings
- Unshielded version with bare wire connections (70mm)
- Wideband version
- Balance adjustment
- Galvanic isolation to avoid/eliminate hum loops
- Suitable e.g. for level matching, can be used for the connection of wireless microphone receivers to line inputs
- Max. input voltage: 350mV/380mV (1% THD/50Hz)
When installing unshielded transformers into units with interference fields (e.g. power transformers), attention has to be paid to respective shielding measures.
| Description | transformer |
| Frequency range | 20-20,000 Hz |
| Control range | - |
| Control frequencies | - |
| Input signal | 380 mV |
| Input sensitivity | - |
| Input impedance | 200 O |
| Output signal | - |
| Output impedance | 10 kO/50 kO |
| Gain | - |
| Phantom power | - |
| Compression | - |
| Gate ratio | - |
| Crossover frequency | - |
| High-pass filter | - |
| Low cut | - |
| Transmission ratio | 1:3/1:10 |
| S/N ratio | - |
| Channel separation | - |
| THD | - |
| Admiss. ambient temp. | 0-40 °C |
| Power supply | - |
| Dimensions | 14 x 11 x 12 mm (w/o cable) |
| Weight | 7 g |
| Inputs | - |
| Outputs | - |
| Other features | - |
| Width | 14 mm |
| Height | 11 mm |
| Depth | 12 mm |
| Length | - |
| Rack spaces, RS | - |
| Weight | 7.3 g |